How To Clean Bissell Revolution Pet Pro: Step-By-Step Guide

Unplug the machine, empty and rinse tanks, clean nozzle and brushes, then air-dry.

If you want your carpets clean and your machine fresh, you must know how to clean bissell revolution pet pro the right way. I service pet homes every week and have cleaned dozens of these units. In this guide, I show you how to clean bissell revolution pet pro step by step, with pro tips, mistakes to avoid, and a simple schedule that keeps suction strong and odors away.

What You’ll Need

Having the right tools makes cleaning fast and safe.

• Soft brush or old toothbrush
• Microfiber cloths and paper towels
• Small scissors for hair wrap
• Warm water (not hot or boiling)
• Mild dish soap
• White vinegar for removable parts only
• Optional enzyme cleaner for pet odors
• A drying rack or clean towel area

These are easy items you likely have at home. They help you clean without harming seals or plastic.

Safety First and Quick Prep

Before you start, do this.

• Unplug the cleaner. Never clean while powered.
• Move to a sink or tub with good light.
• Let the machine cool if you just used it.
• Work over a towel to catch drips.

I learned early that rushing causes leaks later. Slow down and you will get a better result.

Step-by-Step: How to Clean Bissell Revolution Pet Pro After Every Use

This fast routine takes five to ten minutes. It keeps hair, grit, and odors from building up. It also protects the pump and seals.

1. Empty and rinse the dirty water tank

• Pull the tank out. Remove the black plug and pour out water.
• Pop off the float stack and debris screen if your model has them. Rinse well.
• Check the rubber gasket on the lid. Make sure it is clean and seated.

2. Rinse the clean water tank and cap

• Dump any leftover formula. Rinse the tank and the cap.
• Wipe the cap’s rubber seal. A cracked seal can cause leaks.

3. Remove and wash the front nozzle

• Release the clear nozzle by pressing the latch. Pull straight out.
• Rinse under warm water. Use a brush to scrub hair and lint from corners.
• Set it aside to dry. A clean nozzle restores suction.

4. Clear hair from the brush area

• Remove the brush roll cover if your model allows. Some pop off. Some slide.
• Use scissors to cut hair along the grooves. Pull out all debris.
• Wipe the edges and side brushes. Spin the brushes by hand to check.

5. Clean the red lint screen and foot channel

• At the base, remove any lint screen or filter. Rinse it.
• Wipe the air channel in the foot. Hair here can choke airflow.

6. Flush the tools and hose if used

• Attach the tool. Fill the clean tank with warm water only.
• Squeeze the trigger for 10 to 15 seconds over a sink. This purges residue.
• Do a few dry passes to suck out water. Empty the dirty tank again.

7. Wipe the body and wheels

• Use a damp cloth. Pet hair hides on axles and corners.

This is the core of how to clean bissell revolution pet pro in daily use. It protects suction and stops smells before they start.

Monthly Deep Clean: A Pro-Level Refresh

For homes with heavy shedding or urine spots, do this once a month. It gives your Bissell a factory-fresh reset.

• Disassemble more parts

  • Remove both tanks, the clear nozzle, and the brush cover.
  • Take out the float stack and debris screen from the dirty tank lid.
  • Pull the brush edge guides if your model has them.

• Soak removable plastics

  • Soak the nozzle, brush cover, and screens in warm water with a drop of soap.
  • For scale or film, use a 1:1 white vinegar and water mix for 10 to 15 minutes.
  • Rinse well. Do not soak any motor or electrical part.

• Detail clean

  • Use a soft brush on seams and gaskets.
  • Wipe the seals with a damp, soapy cloth. Rinse and dry.
  • Inspect for wear. Replace warped or torn seals.

• Flush the formula path with water only

  • Fill the clean tank with warm water.
  • Run the machine on an empty floor section for one minute with trigger held.
  • Then do dry passes to pull out water. Empty the dirty tank.
  • Avoid vinegar through internal lines unless the manual allows it.

• Inspect belts and brush movement

  • Spin the brushes by hand. They should turn smooth.
  • If they bind, look for hair in the ends. Clear both sides.

Over the years, this deep clean has saved pumps and stopped mystery odors for my clients. It is the heart of how to clean bissell revolution pet pro for long life.

Odor Removal and Sanitizing Without Damage

Pet homes can smell. You can fix it without harsh chemicals.

• Enzyme cleaner on tanks and lids

  • Spray, wait 5 to 10 minutes, then rinse. Enzymes break down urine odor.

• Vinegar for removable parts only

  • Use 1:1 vinegar and water for the nozzle, caps, and screens.
  • Rinse well to avoid lingering smell. Do not run vinegar through the pump.

• Hydrogen peroxide for stubborn smells

  • Use 3% peroxide on cloth. Wipe, wait 5 minutes, then rinse.
  • Test a small area first to avoid haze on clear plastic.

• Sun and air

  • Set parts in a bright, airy spot. Light and airflow kill damp odors.

Never mix vinegar and peroxide. Rinse between products. Your nose will thank you.

Drying and Reassembly Checklist

Dry parts stop mold. Take your time here.

• Shake off water. Pat dry with a towel.
• Stand the nozzle and lids upright to drip dry.
• Let parts air-dry for at least 12 to 24 hours if you can.
• Reinstall the float stack, screens, and gaskets.
• Seat the clear nozzle until it clicks. Check there are no gaps.
• Install both tanks. Make sure they lock tight.

Do a quick test run with water only. This confirms you sealed it right. This step is a key part of how to clean bissell revolution pet pro and avoid leaks.

Maintenance Schedule and Storage

A simple schedule keeps your machine strong.

• After every use

  • Empty and rinse both tanks.
  • Clean the nozzle and clear hair from brushes.
  • Wipe the base and wheels.

• Weekly in heavy pet homes

  • Clean the lint screen and foot channel.
  • Flush tools and hose with warm water.

• Monthly

  • Do the deep clean routine.
  • Inspect seals and brush ends.

• Storage

  • Store tanks dry and open if space allows.
  • Keep the machine in a cool, dry spot. Do not leave formula in the tank.

These habits make how to clean bissell revolution pet pro fast and stress free.

Troubleshooting and Common Mistakes to Avoid

Small slips cause most issues. Here is how to avoid them.

• Loss of suction

  • The clear nozzle is not seated or the dirty tank lid is misaligned.
  • Fix the click fit. Clean the float and seals. Suction returns.

• Drips or leaks

  • The clean tank cap gasket is dirty or cracked.
  • Clean or replace the gasket. Do not overtighten the cap.

• Brush not turning

  • Hair jam at the ends stops the brush.
  • Cut away hair at both sides. Check for stuck threads.

• Musty smell after use

  • Parts were stored wet.
  • Dry longer and use enzyme on lids and the float stack.

• Using harsh chemicals

  • Bleach or strong solvents can harm seals and cloud plastics.
  • Use warm water, mild soap, and vinegar only on removable parts.

From field calls, nine out of ten “broken” units need a clean nozzle or a seated tank. Master these checks and you master how to clean bissell revolution pet pro like a pro.

Pro Tips From the Field

These small habits save time and keep results high.

• Keep a small pair of scissors near the machine. Cut hair after each job.
• Use distilled water if you have hard water. It reduces scale.
• Mark a monthly deep clean on your phone calendar.
• Do one final dry pass on carpets after cleaning. It pulls extra water and hair.
• Keep a spare cap gasket in a drawer. It costs little and stops leaks fast.

These tips come from real homes with big dogs and busy lives. They make how to clean bissell revolution pet pro simple and repeatable.

Frequently Asked Questions of how to clean bissell revolution pet pro

How often should I clean the nozzle and brushes?

Clean them after every use. Hair and grit build fast and will block suction if left in place.

Can I use vinegar inside the machine?

Do not run vinegar through the pump or lines. Use vinegar only on removable parts like the nozzle, caps, and screens, then rinse well.

Why does my dirty tank fill fast and stop suction?

The float rises when the tank is full or the lid filter is clogged. Empty the tank and rinse the float stack and debris screen to restore airflow.

What causes a chemical smell after cleaning?

Old formula in the clean tank or cap can sour. Rinse the tank and cap after each job and let them dry open.

How do I clean the hose and tools?

Attach the tool, fill the tank with warm water, and hold the trigger over a sink for 10 to 15 seconds. Do dry passes, then empty the dirty tank.

Can I put parts in the dishwasher?

No. Heat can warp plastic and damage seals. Hand wash with warm water and mild soap only.

What if the brush will not spin after cleaning?

Check both brush ends for hair jams and confirm the nozzle and cover are seated. If it still fails, the belt may need service.

Conclusion

You now know how to clean bissell revolution pet pro the right way. Empty and rinse after each use, wash the nozzle, clear hair from the brushes, and let parts dry. Add a quick monthly deep clean and you will keep suction strong, stop odors, and extend the life of your machine.

Make this a habit on your calendar this week. Your carpets, your nose, and your pets will thank you. If you found this guide useful, subscribe for more home care tips or leave a comment with your own favorite hacks.